Exploration of Musculoskeletal Diseases

Table 2. Occupational health and work capacity characteristics reported by operators in an automotive industry

Variables	Total group (n = 30)
Failures due to lack of material, n (%)	6 (20)
Failures regarding equipment problems, n (%)	16 (53.3)
Failures and problems with the team, n (%)	0 (0)
Failures when depending on other sectors, n (%)	2 (6.7)
Failures and other factors, n (%)	1 (3.3)
Difficulties due to little work space	3.45 ± 4.33
Demand for speed, even within a schedule	6.38 ± 5.18
Enough time to finish work	7.72 ± 5.32
Performs other work that is not your role	2.56 ± 3.09
Insufficient number of operators for the function	1.54 ± 1.89
Managers are safe and effective	10.02 ± 4.2
Sufficient lighting for activities in the sector	8.4 ± 4.9
Uncomfortable temperature for work	9.05 ± 3.62
Workplace is noisy	7.39 ± 3.55
Noise interferes with activities	2.88 ± 2.89
Pain/discomfort during activities	3.86 ± 3.7
Work capacity Current work capacity Work capacity in relation to physical demands Work capacity in relation to mental demands	9.37 ± 1.67 9.11 ± 1.68 9.28 ± 1.62

Return to article view

Quantitative data expressed as mean ± standard deviation and categorical data as absolute count and percentages between parenthesis

Declarations

Author contributions

RFAdC: Investigation, Data analysis, Writing—original draft, Writing—review & editing. MAM: Conceptualization, Investigation, Writing—review & editing. All authors read and approved the submitted version.

Conflicts of interest

The authors declare that they have no conflicts of interest.

Ethical approval

The research began, exclusively, after its approval by the Research Ethics Committee of the Federal University of Pernambuco, following the guidelines of Resolution No. 466/2012, being approved on 09/05/2019, by opinion no. 3,555,847. All research participants were guaranteed anonymity, with the signing of a Free and Informed Consent Form, explaining in detail the objective of the research.

Consent to participate

Informed consent to participate in the study was obtained from all participants.

Consent to publication

Not applicable.

Availability of data and materials

The raw data supporting the conclusions of this manuscript will be made available by the authors, without undue reservation, to any qualified researcher.

Funding

Not applicable.

Copyright

References

Padovani EB. A SAÚDE DO TRABALHADOR NA ENGRENAGEM AUTOMOTIVA: um panorama dos adoecimentos e acidentes de trabalho nas plantas montadoras instaladas no Brasil [dissertation]. Curitiba: Universidade Tecnológica Federal do Paraná; 2016.

Hey AP, Montezeli JH, Bobroff MCC, de Pádua E, Hamasaki RT, Caveião C. Sickness Absenteeism in Workers of an Automotive Components and Parts Industry in Curitiba – Paraná. Revista de Divulgação Científica Sena Aire. 2013;2:27–36. Portuguese.

Longen WC, Barcelos LP, Karkle KK, Schutz FdS, Valvassori SdS, Victor EG, et al. Assessment of disability and quality of life among ceramic industry workers. Rev Bras Med Trab. 2018;16:10–8. [DOI] [PubMed] [PMC]

Bolis I, Sigahi TFAC, Thatcher A, Saltorato P, Morioka SN. Contribution of ergonomics and human factors to sustainable development: a systematic literature review. Ergonomics. 2023;66:303–21. [DOI] [PubMed]

Horan KA, Shoss MK, Mejia C, Ciarlante K. Industry Context as an Essential Tool for the Future of Healthy and Safe Work: Illustrative Examples for Occupational Health Psychology from the Hospitality Industry. Int J Environ Res Public Health. 2021;18:10720. [DOI] [PubMed] [PMC]

Melo TBA. Do Fordismo à Acumulação Flexível: uma análise das mudanças no padrão de consumo [dissertation]. Brazil: Universidade Federal do Rio de Janeiro; 2014.

Santos CA. Produção enxuta: uma proposta de método para introdução em uma empresa multinacional instalada no Brasil [dissertation]. Curitiba: Universidade Federal do Paraná; 2003.

Casotti BP, Goldenstein M. Panorama do setor automotivo: as mudanças estruturais da indústria e as perspectivas para o Brasil. BNDES Setorial. 2008;28:147–88.

de Morais Júnior D. Análise integrada das perdas sob a ótica do design sustentável e da produção enxuta [dissertation]. Curitiba: Universidade Federal do Paraná; 2006.

10.

Filus R. Utilização da imagem infravermelha normalizada para diagnóstico de doenças ocupacionais e correlação com eletromiografia de superfície e ressonância magnética [dissertation]. Curitiba: Universidade Federal do Paraná; 2011.

11.

d’Alva MV. Análise ergonômica do trabalho e os processos de transferência de tecnologias: estudo de caso em uma empresa fornecedora do polo de duas rodas [dissertation]. Rio de Janeiro: Universidade Federal do Rio de Janeiro; 2011.

12.

Comper MLC. Tradução, adaptação transcultural e propriedades clinimétricas do instrumento Quick Exposure Check (QEC) versão Brasi [dissertation]. São Paulo: Universidade Cidade de São Paulo; 2011.

13.

de Mattos DL. Avaliação de um modelo de gestão de ergonomia baseado em práticas da produção enxuta: enfoque no índice de absenteísmo em uma empresa de embalagens de papelão ondulado catarinense [dissertation]. Florianópolis: Universidade Federal de Santa Catarina; 2015.

14.

de Paula A, Haiduke IF, Marques IAA. Ergonomia e Gestão: complementaridade para a redução dos afastamentos e do stress, visando melhoria da qualidade de vida do trabalhador. Revista Conbrad. 2016;1:121–36.

15.

Coutinho GBF, de Abreu W, Teixeira LR, Bonfatti RJ, Guizze CLC. Avaliação das condições de trabalho em uma empresa atacadista de alimentos perecíveis: uma abordagem centrada na ergonomia física e organizacional. R Ação Ergon. 2017;11:127–40.

16.

Lyra TM, Bezerra ACV, Veloso de Albuquerque MDS. Challenges of Development Poles in the perspective of local social actors of Goiana, Pernambuco state, Brazil. Physis Revista de Saúde Coletiva. 2015;25:1117–39. Portuguese. [DOI]

17.

Marques GM, Silva-Junior JS. Rotator cuff syndrome in truck assembly line workers. Cad saúde colet. 2015;23:323–9. Portuguese. [DOI]

18.

Sun M, Feng W, Wang F, Li P, Li Z, Li M, et al. Meta-analysis on shift work and risks of specific obesity types. Obes Rev. 2018;19:28–40. [DOI] [PubMed]

19.

Hong QN, Li J, Kersalé M, Dieterlen E, Mares A, Ahmadian Sangkar Z, et al. Work Disability and Musculoskeletal Disorders Among Teleworkers: A Scoping Review. J Occup Rehabil. 2024;[Epub ahead of print]. [DOI] [PubMed]

20.

Assunação AA, Silva Abreu MN. Fatores associados a distúrbios osteomusculares relacionados ao trabalho autorreferidos em adultos brasileiros. Rev Saude Publica. 2017;51:1s–12s. [DOI]

21.

Basner M, Babisch W, Davis A, Brink M, Clark C, Janssen S, et al. Auditory and non-auditory effects of noise on health. Lancet. 2014;383:1325–32. [DOI] [PubMed] [PMC]

22.

Tousignant-Laflamme Y, Houle C, Longtin C, Gérard T, Lagueux E, Perreault K, et al. Prognostic factors specific to work-related musculoskeletal disorders: An overview of recent systematic reviews. Musculoskelet Sci Pract. 2023;66:102825. [DOI] [PubMed]

23.

Frasie A, Houry M, Plourde C, Robert MT, Bouyer LJ, Roy JS. Feedback for the prevention and rehabilitation of work-related musculoskeletal disorders: A systematic review. Work. 2023;76:61–94. [DOI] [PubMed]

24.

Pereira da Silva M, Hespanhol Bernardo M, Aparecida Souza H. Relationship between Mental Health and Work: unionists’ conception and possible confrontation practices. Rev Bras Saude Ocup. 2016;41:e23. [DOI]

25.

Mathiassen SE. Diversity and variation in biomechanical exposure: what is it, and why would we like to know? Appl Ergon. 2006;37:419–27. [DOI] [PubMed]

26.

Rodriguez AC, Barrero LH. Job rotation: Effects on muscular activity variability. Appl Ergon. 2017;60:83–92. [DOI] [PubMed]

27.

Dawal SZ, Taha Z. The effect of job organizational factors on job satisfaction in two automotive industries in Malaysia. J Hum Ergol (Tokyo). 2007;36:63–8. [PubMed]

28.

Aptel M, Cail F, Gerling A, Louis O. Proposal of parameters to implement a workstation rotation system to protect against MSDs. Int J Ind Ergon. 2008;38:900–9. [DOI]

29.

Elias SJB, Merino E. Aspectos ergonômicos na utilização das técnicas de produção enxuta: uma contribuição para a melhoria global do sistema produtivo. ENEGEP. 2007.

30.

Silva JFS. Trabalhando cada vez mais rápido para manter o ritmo: apreendendo a dinâmica social do processo de trabalho e saúde numa indústria automobilística no contexto local de Betim/Working ever faster to maintain the rhythm: studying the social dynamics of the labor and health process in an automobile industry in the city of Betim [dissertation]. Brasília: LILACS; 2003.

31.

Marqueze EC, Moreno CRC. Job satisfaction - a short review. Rev Bras Saúde Ocup. 2005;30:69–79. Portuguese. [DOI]

32.

Ozturkoglu O, Saygili EE, Ozturkoglu Y. A manufacturing-oriented model for evaluating the satisfaction of workers – Evidence from Turkey. Int J Ind Ergon. 2016;54:73–82. [DOI]

33.

Pinto AG, Teresa MJA, Abrahão RF. Ergonomic practices in a group of industries in the Metropolitan Region of Campinas: nature, management, and actors involved. Gest Prod. 2018;25:398–409. [DOI]